Be Tech Ready!!
CPUGamingGPUHow to

How to build a gaming PC: Simple tips and tricks

When your computer isn’t made for gaming or can’t handle the new games, it’s probably a good idea to try and build your own gaming PC. If you want to notch up your gaming experience, we will tell you how to build a gaming computer and make an impressive setup.

The biggest factor to consider is how well you want your gaming computer to run once you are done putting everything together. It’s absolutely possible to build a powerful gaming PC without shelling out a fortune. But if you wish to push your latest gear to its limits, be prepared to spend some extra money.

Alright, what stuff do you need to put together a gaming PC? The hardware is like the powerhouse of your setup. It’s what pretty much determines how well your PC runs – the speed, how quickly it responds, the frame rates, and even if you can do things like game while recording your gameplay. Other things like accessories and software matter too, but they sort of work alongside the hardware and depend on how strong it is.

Get a powerful motherboard

The motherboard is like the main building block for any system. So, it’s the first thing you should jot down on your list. It decides how big your PC is gonna be and what other parts you can throw in there. That’s super important because your motherboard has to be able to handle the level of performance you want from your setup. It also tells you what kind of storage drives you can stick in there – like the size of the drive (2.5-inch, mSATA, or m.2) and the way it connects (SATA or PCle).

Also Read: How to prevent your phone’s battery from degradation

Install the CPU

Take the CPU out of the box, but be careful not to mess with the gold pins underneath. Stick the processor onto the motherboard by pressing down firmly and following what the manual says. If you’re putting on a heatsink, squeeze out a pea-sized blob of thermal paste. Then lock down the heatsink on top of the CPU with the four screws.

When you’re picking out which CPU to slap in, keep an eye on the gigahertz (GHz) – the higher it is, the faster the thing works. This is especially crucial if you’re planning on overclocking ’cause the more GHz you use, the more it’s gonna crank up.

Install the RAM

RAM is a piece of cake to put in when you’re building a PC. Find the slots on the motherboard for the memory. Hold your RAM sticks by the sides to stay clear of the gold pins. If there’s no heat spreader, watch out for the chips on the stick too. Match up the notches on the stick with the groove in the slot, then give it a good push until you hear a click. Just remember, it’s gonna take around 30 pounds of pressure to get it all the way in.

Memory, also known as RAM, gives your processor and graphics card the stuff they need to get things done. The more gigabytes of memory you have, the more ammo they’ve got to work with, leading to a quicker system, smooth performance, and better framerates.

Fit the motherboard in the case

Stick the I/O shield into the rectangle hole of the case. Then, slide the motherboard into the case until the ports go through the I/O shield. When it’s in, use the screws that came with it to lock the motherboard down. Just be careful not to go too tight, ’cause that could end up cracking the motherboard.

Install the GPU and SSD

When you want your computer to do more, you gotta give it the juice it needs to meet those demands. Getting those super sharp graphics needs extra memory to handle all those tiny details popping up on the screen – more gigabytes of RAM means more power for those graphics.

Depending on what kind of SSD you have (like 2.5-inch, mSATA, or M.2), you’ll need to connect it to the storage thingy and then slot it into the drive spot (if it’s a 2.5-inch SSD).

Also Read: How to speed up your Windows PC with these simple hacks

Install the fans and power supply

Put in your cooling fan using any of the mounting stuff that came with it. For CPU fans, make sure you keep pushing down on the CPU while you snap the lever into the mount. Then, stick the fans into the motherboard.

Take off the thing that’s holding the power supply. Stick that thing onto the power supply, then slide the whole shebang into the case until it’s all smooth with the case.

Attach cables and peripherals

Hook up all the USB, audio, GPU, CPU, drives, power supply, heatsink, and cooling cables like the manual says. Then, stick in your mouse, keyboard, screen, and headset if you got ’em.

If you have a top-notch graphics card and the gear to back it up, grab a monitor that can really bring those visuals to life. A gaming mouse, keyboard, and headset also amp up your gaming by making your moves more precise with their comfy designs. These peripherals are just one of the many reasons why a lot of gamers swear by PC gaming.